Note :After receiving the product, please charge it and download the app The camera needs to be charged to be able to monitor for long periods of time
HD pixel, advanced camera with night vision
Support 2.4G WiFi, does not support 5G
Support remote monitoring
Support motion detection and alam(540TVL support this function)
Resolution Ratio: 1080P/720P
Video Format: AVI
Memory Card Type: support TF card up to 128GB, (TF is not included)
Compressed Format: H.264
APP Support: Android/iOS
1*charging cable(Extended version)
540VTL is 2million pixels,420VTL is1 million pixels
540TVL support motion and alarm,480TVL not support
480TVL packaging diagram
540TVL packaging diagram
Note：if the App always failes,try to check the following:
A: Camera indicator light does not flash slowly and AP is not turned on before you start configuring wifi
B:If the phone fails to connect to camera AP,you need to configure the phone to connect to the AP hotspot of the camera
C: Support ordinary routers,but public routers requiring login page authentication are not supported.
D:Make sure there are no errors in network name,network password and UID when configuring
E:Wifi names and passwords in chinese are not supported at this moment
F:5Gwifi signal is not supported
G: Check whether the wifi indicator light is always on,if yes,it means that camera networking is successful,please add an online camera directly,App may not detect a successful camera configuration due to network shielding
H:if wifi is wep encryption mode ,change to WAP
1.Why the search tool is unable to detect the camera?
A:Please make sure if the network connection is good,turn off thr firewall and security software,and make sure the camera is connected to the router.
2.Why does the camera always require a user name and password,or an incorrect users?
A:The default password for thr camera is 6666.if you forget your user name or password,you can resume the camera to the default setting to get the default username and password
3.How can Iresume my camera to default settings?
A;Please press the reset button on the camera for about 5 seconds until the camera restarts.
4.why the image is blurred?
A:Remove the protective film of the lens.If it is still not clear,rotate the camera lens and focus it so that you can get a clear image after focusing.